HP Integrity NonStop H-Series - Manual (Page 30)

Troubleshooting
M8705A Tape Drive Installation and User’s Guide — 694638-001
5 -6
Understanding LED Sequences
Drive FLASHES
The drive mechanism has
detected an error. Load a new cartridge. If the
error persists, power cycle or
reset the drive.
If the Drive LED remains on,
call for service.
Drive, Tape and Ready
FLASH
There is a firmware
download problem. Insert a cartridge to clear the
LED sequence. If the
condition persists, call for
service.
Drive and Ready ON with
Tape and Clean OFF.
Alternates repeatedly.
The drive has a firmware
error. Power cycle or reset the
drive. Upgrade the firmware.
If the condition persists, call
for service.
Table 5-1. Clean, Tape, Drive and Ready LED Sequences
LED Sequence Cause Action Required