HP Integrity NonStop H-Series - Manual (Page 9)

M8705A Tape Drive Installation and User’s Guide — 694638-001
2 -1
2
Installing and Configuring the
Tape Drive for the NonStop NS-
Series Integrity Server
This section includes:
Installation
1. Unpack and check the shipment.
2. Connect one end of the SAS cable to the SAS port at the rear of the tape drive.
3. Connect the opposite end of the SAS cable to one of the SAS HBA connections on
the rear of the CLuster I/O Module (CLIM).
For more information on the CLuster I/O Module see the “CLuster I/O Module
(CLIM) Installation and Configuration Guide.”
You can use any of the SAS cables in Table 2-1 .
Installation 2-1
Configuration 2-2
Figure 2-1. Front View of Tape Drive