HP XP External Storage Software - Manual (Page 72)

• LDEV Status: Mapped external LU's status. Possible values: Normal, Unknown, Blockade,
Warning, and Format.
Table 9 Mapped external LU status values
Description LDEV status
LDEV status is
normal. Normal
LDEV status has
yet to be
ascertained. Unknown
I/O traffic to the
LDEV is not
permitted. Blockade
External LUs
have abnormal
status. Warning
Volume is in the
process of being
formatted. Format
• Product name of the connected external array
• ExG: External LU group number. This appears when you group the LUs from one or more
external arrays under a common number.
• Serial: Product serial number.
• Product: Product name.
• Vendor: Vendor name.
• Ex-Dev. Status: Status of the operation executed on the external array, or status of the path
connection. Possible values: Normal, Unknown, Blockade, Warning, Checking, Cache Destage,
and Disconnect. For a description of these values, see
Table 8 .
• LDEV Status: Mapped external LU's status. Possible values: Normal, Unknown, Blockade,
Warning, and Format. For a description of these values, see Table 9 .
• External LU group number
• Characteristic: External LU's identification number.
• Device: External LU's device name.
• Capacity: External LU's capacity in 512-byte blocks.
• Ex-Dev. info.: External array information. When the external array is an XP1024/XP128 or
TagmaStore Workgroup Modular Storage (WMS) array, an asterisk (*) appears.
• VMA: Information about the VMA setting by LUN Security XP Extension. When VMA is set for
the volume, an asterisk (*) appears.
• Alter. Path: Number of configured paths in the format The number of valid paths (the number
of primary alternate paths).
• IO Suppression: I/O Suppression mode: Enable or Disable. For more information, see External
LU attributes set by mapping .
• Cache Mode: Cache mode: Enable or Disable. For more information, see External LU attributes
set by mapping .
• Path: When paths are set, an asterisk (*) appears.
External Storage XP panes 72