HP XP P9000 for Compatible High Perf FICON Connectivity Software - Manual (Page 116)

Java
Description
This command starts the Export Tool and exports monitoring data into files. To start the Export Tool,
write this Java command in your batch file and then run the batch file.
Syntax
Java -classpath class-pathrproperty-parameters sanproject.getmondat.RJMdMain
Operands
Description Operand
Specifies the path to the class file of the Export Tool. class-path
The path must be enclosed in double quotation marks (").
You can specify the following parameters. At minimum you must specify -Dmd.command. property-parameters
• -Dhttp.proxyHost=host-name-of-proxy-host, or
-Dhttp.proxyHost=IP-address-of-proxy-host
Specifies the host name or the IP address of a proxy host. You must specify this parameter if
the system that runs the Export Tool communicates with the SVP via a proxy host.
• -Dhttp.proxyPort=port-number-of-proxy-host
Specifies the port number of a proxy host. You must specify this parameter if the system that
runs the Export Tool communicates with the SVP via a proxy host.
• -Xmxmemory-size(bytes)
Specifies the size of memory to be used by JRE when the Export Tool is being executed. You
must specify this parameter. The memory size must be 536870912, as shown in the Example
later in this topic. If an installed memory size is smaller than the recommended size of the PC
running Remote Web Console, you must install more memory before executing the Export Tool.
If the installed memory is larger than the recommended memory for the Remote Web Console
PC, you can specify more memory than as shown in the Example. However, to prevent slowing
of execution speed, do not set oversized memory size.
•
-Dmd.command=path-to-command-file
Specifies the path to the command file
•
-Dmd.logpath=path-to-log-file
Specifies the path to log files. A log file is created whenever the Export Tool executes.
If this parameter is omitted, log files are saved in the current directory.
• -Dmd.logfile=name-of-log-file
Specifies the name of the log file.
If this parameter is omitted, log files are named exportMMddHHmmss.log. MMddHHmmss
indicates when the Export Tool executed. For example, the log file export0101091010.log
contains log information about Export Tool execution at Jan. 1, 09:10:10.
• Dmd.rmitimeout=timeout(min.)
Specifies the timeout value for communication between the export tool and the SVP:
◦
Default: 20 minutes
◦
Minimum: 1 minute
◦
Maximum: 1,440 minutes (24 hours)
If a request does not come from the export tool within the timeout period, the SVP determines
that execution has stopped and disconnects the session with the export tool. Therefore, if the
machine on which the export tool is running is slow, export tool sessions may be disconnected
unexpectedly. To prevent this from occurring, increase the timeout period by entering a larger
value in this parameter.
116 Export Tool