AT&T 9345 - Manual (Page 11)

8
TELEPHONE OPERATION
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer
off and extend the battery life.
1 Make sure the handset is off.
2 Press
G to enter programming mode.
3 Press
> until the screen displays RINGER:.
4 Press
s. The screen displays the current setting.
5 Press
> to select 1, 2, 3, 4, or OFF. You will hear a sample
of each ring.
6 Press
s to choose the displayed ringer setting.
Temporary Tone Dialing
If you have dial pulse (rotary) service, you can change from dial pulse
to touch tone dialing during a call by pressing
*. This is useful if you
need to send touch tone signals for access to telephone banking or
long-distance services.
1 Dial the number.
2 Press
*. Buttons pressed after this send touch tone signals.
3 After you hang up, the phone automatically returns to
dial pulse (rotary) service.
Headset Jack
You can use this telephone hands-free when
you install any AT&T 2.5 mm headset,
purchased separately.
Plug the headset into the jack located
on the right side of the handset
(under the small rubber flap).
Do not force the connection,
but make sure the plug
fits securely.
9345_book_1ATT 6/5/01 11:34 AM Page 8