Configuring remote workstations, Windows systems, Requirements – HP StorageWorks 2.32 Edge Switch User Manual

Page 261: Installation procedure, D configuring remote workstations, Configuring, Remote workstations, Dconfiguring remote workstations

Advertising
background image

HA-Fabric Manager user guide 261

D

Configuring remote workstations

This appendix describes the procedures for installing the HAFM application on a remote

workstation. To run HAFM on a remote workstation, you must first download and install the HAFM

application from the HAFM appliance.
This appendix describes the following topics:

• Windows systems

, page 261

• Solaris systems

, page 265

• HP-UX, AIX, and Linux systems

, page 267

Windows systems

This section describes the procedures for installing HAFM on a remote workstation running

Windows 2000, Windows NT, or Windows XP.

Requirements

The download and installation process requires the use of a PC with the following minimum system

requirements:

•

Operating system (one of the following):
• Windows 2000 Professional (with service pack 3 or above)
• Windows 2003
• Windows NT 4.0 (with service pack 6a)
• Windows XP (with service pack 1a)

•

1 GHz Pentium III processor

•

1 GB RAM

•

350 MB available disk space

•

Video card supporting 256 colors at 800 x 600 resolution

•

Ethernet network adapter

•

Java-enabled web browser, such as Microsoft Internet Explorer (version 4.0 or later) or Netscape

Navigator (version 4.6 or later)

Newer versions of HAFM or Element Managers installed on the HAFM appliance are automatically

downloaded when the remote client logs in to the appliance.

Installation procedure

To install HAFM on a remote workstation:

1.

Obtain the HAFM appliance address from your network administrator.

2.

Open a web browser.

3.

Enter the HAFM appliance address in the Location (or Address) field on the browser, and then

press Enter.

Advertising