HP StorageWorks 2.32 Edge Switch User Manual

Page 256

Advertising
background image

Informational and error messages

256

Stop diagnostics failed.

The test is already

running.

Diagnostics for the port

was not running and Stop

was selected on the Port

Diagnostics dialog box.

Diagnostics quit for the

port for some reason, but

the Stop button remains

enabled.

Verify port operation. Retry

diagnostics for the port and choose

Stop from the dialog box. If

problem persists, contact the next

level of support.

Stop diagnostics failed.

The test was not running.

This action failed because

the test was not running.

Informational message.

Switch Binding was

removed from attached

devices that are also

participating in Port

Binding. Please review

the Port Binding

Configuration.

The device WWNs were

removed from the

director's Switch

Membership List

(SANtegrity Binding

feature), but you should

note that one or more of

these devices still has

security control in Port

Binding.

Verify that the security level for

each device is as required by

reviewing the Bound WWN list in

the Configure Ports dialog box.

System diagnostics

cannot run. The

Operational Status is

invalid.

System diagnostics

cannot run on switches

with failed ports

Replace failed ports.

The add firmware process

has been aborted.

You aborted the process

to add a firmware version

to the HAFM appliance’s

firmware library.

Verify the firmware addition is to

be aborted, then click OK to

continue.

Switch clock alert mode

must be cleared before

enabling period

synchronization.

Clock alert mode is

enabled through the

Configure FICON

Management Server

dialog box and user is

attempting to enable

Periodic Date/Time

Synchronization through

the Configure Date and

Time dialog box.

Disable clock alert mode through

the Configure FICON

Management Server dialog box.

The data collection

process failed.

An error occurred while

performing the data

collection procedure.

Try the data collection procedure

again. If the problem persists,

contact the next level of support.

Table 30

Element Manager messages (continued)

Message

Description

Action

Advertising