HP StorageWorks 2.32 Edge Switch - Manual (Page 85)

HA-Fabric Manager user guide 85
The Hardware view is displayed ( Figure 41 ).
Figure 41 Hardware view
b. Verify that the WWN has the correct syntax (xx:xx:xx:xx:xx:xx:xx:xx).
c. Verify that the Type Number is one of the following:
003016
003032
003216
003232
004300
004500
005000
006064
006140
4. Verify SNMP connectivity.
a. Use a third-party MIB browser to verify the SNMP connection.
b. Change the SNMP default timeout:
• Stop the server.
• Increase the default SNMP settings. If the device is running heavy traffic or is known to
have slow SNMP response time, moderately increase the SNMP timeout (default timeout
is one second) and retry count (default count is one retry).