HP PD0800 Pocket Media Drive - Manual (Page 7)

Some HP computers have vertically oriented drive
bays, and some have horizontally oriented drive
bays; both accommodate your HP Pocket Media
Drive.
WARNING: Do not move the computer
with the drive inserted in the bay or
connected to a USB port on the computer.
This can cause damage to the drive and
cause data loss.
Before moving the computer, turn off the
computer and remove or disconnect the
drive safely.
To insert the HP Pocket Media Drive into a specially
designed HP computer:
1 In the horizontal position, insert the drive with the
HP logo facing up and the HP product name right-
reading. In the vertical position, the drive’s flat side
is down, and the rounded side is up. Do not force
the drive into the bay; it should slide easily into
the bay.
2 Slide the drive all the way into the drive bay until
the drive is firmly connected to the internal
connections. When the computer is turned on and
the drive is inserted correctly, the power LED on the
front of the drive is lit.
Drive indicators and connectors
NOTE: The computer may take several seconds to
recognize the HP Pocket Media Drive.
The HP Pocket Media Drive comes with one LED
indicator and a USB connector.
Front of HP Pocket Media Drive
Back of HP Pocket Media Drive
A Power/drive activity LED indicator
B USB 2.0 connector
Connecting the drive to a
computer without a drive bay
The HP Pocket Media Drive is designed to work with
most computers as an external hard disk drive that
you connect using a USB 2.0 cable.
HP Pocket Media Drive User’s Guide 3