HP Integrity NonStop H-Series - Manual (Page 68)

Maintaining the Tape Drive
5158ACL Tape Drive Installation and User’s Guide — 524955-002
5 -4
Removing the Cleaning Cartridge
Removing the Cleaning Cartridge
1. Check the Default screen on the Control Panel to make sure that the
cleaning cartridge has been unloaded from the drive. If not, unload it using
the Load/Unload menu, as described in
Section 3, Operating the Tape Drive .
2. Remove the magazine by using the procedure described under Inserting and
Removing Tape Cartridges on page 3-19.
3. Remove the cleaning cartridge from the magazine.
4. Insert any desired tape cartridge into the empty slot.
5. Insert the magazine in the tape drive.
6. Close the magazine door.