HP Integrity NonStop J-Series - Manual (Page 55)

SST/OB Advanced User Functions 55
9-1-1 Pre-Defined Policy Views
The following policy views are provided out of the box specifically for BASE24 switch application:
• BASE24 Network Policy: This policy determines which Terminals are out of service due to BASE24 failures
network wide.
• BASE24 State Closed Policy: This policy determines the network wide Terminals that are CLOSED as per
BASE24.
• BASE24 Status Down Policy: This policy determines the network wide Terminals that are DOWN as per
BASE24.
• Terminals Down by Device Handler: This policy determines which Terminals are down due to a device
handler process down.
• Terminals Down By Line Handler: This policy determines which Terminals are down due to a Line handler
process down.
• Terminals down by Line Process: This policy determines which Terminals are down due to a line process
down.
• Terminals Down by Resource Node: This policy determines which Terminals are down due to a resource
node process down.
The policy views below are generic policies and are valid for any switch application
• Cashout Problems: This policy determines whether the Terminal has cashout faults in one or more hoppers.
• Communication Problems: This policy determines which Terminals are offline.
• Hardware Problems: This policy determines which Terminals have hardware faults.
• In Maintenance (in Supervisor mode): This policy determines which Terminals are under supervisor mode.
• Out of Service: This policy shows Terminals with faults that put the Terminal in an Out of Service state.
• Printer/Paper/Other Supply Problems: This policy determines which Terminals have problems like printer
paper out, ink out or ribbon etc. i.e. non-cash supply problems.
SST/OB Advanced User Functions