HP Storage Mirroring Software - Manual (Page 101)

Recovery Page 100 of 214
l
Wait for user intervention before recovery—This option is not available for
data recovery. It is for full-server recovery jobs only.
l
Shut down the source server from the original protection job—Specify if
you want to shutdown the source server after the source data is mirrored to
the recovery server. This option is not available if the recovery server is the
original source.
l
Original Protection Job—Specify what to do with the original protection job
if the original source is still online. If the original source is not running, these
options will be discarded because they cannot be performed. This option is
not available if the recovery server is the original source or the repository
server.
l
Delete the original protection job—The original protection job is
stopped and then deleted.
l
Stop the original protection job—The original protection job is
stopped but is not deleted. It can be restarted after the recovery.
l
Leave the original protection job running—The original protection
job is not stopped or deleted. Keep in mind with this option that the data
on the recovery server could become inconsistent or corrupted because
the original source protection job could be transmitting data to the
repository server and that data might get transmitted to the recovery
server, depending on the progress of the recovery process.
11. Click Next to continue.
12. At the Recovery summary page, you can review the choices you have made and
you can also configure optional settings. If you need to make any changes to the
selections you made, click Back to return to the previous pages. If you want to