HP Storage Mirroring Software - Manual (Page 38)

Installation Page 37 of 214
DTACTIVATIONCODE=123456789012345678901234
DOUBLETAKEFOLDER="C:\Program Files\Storage Works\Storage Mirroring"
QMEMORYBUFFERMAX=128
DISKQUEUEFOLDER="C:\Program Files\Storage Works\Storage Mirroring"
DISKQUEUEMAXSIZE=UNLIMITED
DISKFREESPACEMIN=50
DTSERVICESTARTUP=1
PORT=6320
SET_FWPORT=Y
In the sample DTSetup file, the server Alpha would use the parameters defined under
the [Alpha] heading. The server Beta would use the parameters defined under the [Beta]
heading. All other servers would use the configuration under the [Config] section.
Note: Do not leave any parameter blank in the Config or MachineName sections.
Otherwise, a hard-coded default stored in a Storage Mirroring Replicate .dll file
will be used.
DTSetupType
l
DTNT—Both the Storage Mirroring Replicate server and client
components will be installed.
l
DTCO—Only the Storage Mirroring Replicate client components will be
installed.
l
DTSO—Only the Storage Mirroring Replicate server components will
be installed.
If you are installing on Windows Server Core or Windows Hyper-V Server
(standalone), the setup type will be server components only regardless of
your setting.
DTActivationCode
A 24 character, alpha-numeric activation code which applies the
appropriate license to the server. Multiple activation codes can be
separated by a semi-colon.
DoubleTakeFolder
Any valid path specifying the location of the Storage Mirroring Replicate
files