HP Intelligent Provisioning - Manual (Page 34)

<Index0>00 </Index0>
<Index1>01 </Index1>
<Index2>03 </Index2>
<Index3>02 </Index3>
<Index4>04 </Index4>
<Index5>ff </Index5>
<Index6>ff </Index6>
<Index7>ff </Index7>
</Section>
<Section name="PCI_Devices"
helptext=
"Lists of PCI devices and their interrupts-not displayed if default" >EMPTY_DELETE</Section>
<Section name="Controller_Order"
helptext=
"Lists the current boot controller ordering">
<Id0>80 86 25 a3 </Id0>
<Slot0>00 </Slot0>
<BusDev0>00 fa </BusDev0>
<Rest0>41 </Rest0>
<Id1>0e 11 ff ff </Id1>
<Slot1>00 </Slot1>
<BusDev1>00 78 </BusDev1>
<Rest1>c1 </Rest1>
</Section>
</Conrep>
Using HPRCU
HPRCU is an RBSU configuration utility similar to CONREP. This utility is supported on ProLiant
Gen8 servers and later. This utility does not use a definition XML file like the Conrep utility, but
directly reads the same table that RBSU uses for feature names and settings. All features and options
are now number based. Each feature and option has a unique number.
Using HPRCU over CONREP has the following benefits:
•
Simpler user interface— All system ROM settings and the current selections are listed together
in one output/input XML file.
•
Fewer updates—No updated binary or XML file is needed when BIOS adds or changes
features. HPRCU now reads the same tables that RBSU does, which are located in the memory
at system boot. When the BIOS changes or adds a new setting, no update to HPRCU is needed.
•
Default ROM settings enhancement—The HPRCU XML file now shows users the default settings
for each RBSU option.
HPRCU command-line syntax
hprcu -s | -l [-f file.xml ] [ -h ]
34 Scripting Toolkit utilities