HP XP P9000 Command View Advanced Edition Software - Manual (Page 459)

S-VOL (secondary
volume) The copy destination volume of two volumes that are associated in a copy pair
by a storage system volume replication functionality.
SNMP Simple Network Management Protocol
SSD Solid State Drive
SSL Secure Sockets Layer
storage system An external storage device (storage system) connected to a host.
summary pair
status By displaying only the summary status for the copy pairs in each copy group,
Replication Manager allows users to quickly check copy pair status. Replication
Manager determines the summary copy pair status for each copy function (such
as Business Copy and Continuous Access) in turn.
SVP Service Processor
URL Uniform Resource Locator
Virtual Command
Device A command device to which a connection is established over an IP network. It
refers to an SVP or a virtual command device server.
Virtual Command
Device Server A server that functions as a relay for pair management commands. It corresponds
to the virtual command device server described in the HP StorageWorks P9000
RAID Manager User's Guide.
VMA Volume Management Area
VOLSER The label of a volume assigned by the mainframe host.
volume A collective name for the logical devices (LDEVs) and logical units (LUs) that are
created in a storage system.
volume replication
functionality A generic term used to refer to functionality used to perform high-speed
duplication of volumes in storage systems. This functionality allows volumes to
be duplicated from software, such as Business Copy or Continuous Access, that
is loaded in the storage system. This functionality can be used once the license
for it has been registered.
Business Copy Software used to duplicate volumes in a single storage system. Business Copy
duplicates all data on a volume. The fact that Business Copy duplicates all data
on a volume means that the data can be restored, even if the primary volume
has been damaged or destroyed. For more information, see the Business Copy
manuals.
Continuous Access
Journal Software that asynchronously duplicates multiple volumes between storage
systems. Continuous Access Journal temporarily stores differential data on a
journal volume and then duplicates the data. Continuous Access Journal can
duplicate data on remote sites; it can also be used to create 3DC multi-target
and cascade configurations among multiple sites. For more information, see the
Continuous Access Journal manuals.
Continuous Access Software that duplicates volumes between storage systems. Continuous Access
duplicates all data on the volumes. Two types of Continuous Access are provided:
Continuous Access Synchronous, Continuous Access Asynchronous. For more
information, see the Continuous Access manuals.
User Guide 459