HP 3PAR Application Software Suite for VMware Licenses - Manual (Page 79)

Registering Remote Copy Pairs
1. Launch Recovery Manager Software for VMware vSphere Admin Tool and click the HP 3PAR
Management Plug-in and Recovery Manager Software for VMware vSphere Admin
Tool
→vCenter Plug-in.
NOTE: If you have a single RMV server, HP recommends that you register the remote copy
pairs in both directions. If you are using two RMV servers, register each direction just once
on each RMV server.
2. Under the vCenter Plug-in tab, click Remote Copy Pairs tab.
Figure 53 Registering Remote Copy pairs
3. Click Register New.
4. Enter the required information into the following fields for both Local and Remote systems.
Click Register.
Figure 54 Specifying Remote Copy pair details
Registering Remote Copy Pairs 79