HP Integrity NonStop H-Series - Manual (Page 44)

HP NonStop RPM User’s Guide Page 44 of 47
SET TERM TTY ! use no video
SET TERM VT100 ! use VT100 video
SET TERM T6530 ! use T6530 video
SET CRIT 50 WARN 10 INFO 1
SET %1 ! Only show Cpus/Processes if >= 1% busy
5.7 STATUS Command
STATUS [ SSG | [\<node>].$<PID> ]
The STATUS command displays the status of SeeView Server Gateway (SSG) processes on
the ADD nodes, or for a given $PID.
EXAMPLES
STATUS ! show status of all SSG's on all ADD nodes
STATUS SSG ! same as STATUS
STATUS $ZSCX ! show status of pid $ZSCX
5.8 T6530 Command
T6530
The T6530 command is equivalent to entering SET TERM T6530.
You can put commands in <object>CNF file, where <object> is the name of this
program.
For example, if the program object file name is "RPM65" then you can create a file named
RPM65CNF. Whenever you subsequently run RPM65 it will automatically obey all the
commands that are contained in the file RPM65CNF.