Call coverage/consult, Call forwarding — follow me, To cancel call forwarding – AT&T Voice Terminal 6434 User Manual

Page 2: Call park, To retrieve a parked call from any extension, Call pickup, Conference, To drop the last party added to a conference call

Advertising
background image

To prevent other bridged terminals from entering

a call (on a per call basis)

1

Press the softkey below Excl while active on a call

or Press [

Excl xxxxx

] while connected to the call.

NOTE: Pressing the softkey below Excl or
pressing [

Excl xxxxx

] again reactivates bridging.

CALL COVERAGE/CONSULT

To answer a call for a coworker for whom you are
a coverage point

1

Press [

xxxxx

] of incoming call when ring begins

or green light flashes.

To talk privately with a coworker after answering
a redirected call

1

2

3

4

Press [

Transfer

].

Call is put on hold.

Press the softkey below Cnslt
or
Press [

Consult

]

or Dial coworker’s extension.

Discuss call, if appropriate.

If coworker is not available, press the fluttering

[

xxxxx

] to reconnect to the call

or Press [

Transfer

] again to send call to coworker

or Press [

Conf

] to make it a 3-party call.

CALL FORWARDING — FOLLOW ME

To temporarily redirect all calls to an extension
or outside number

1

2

3

Press softkey below CFrwd

or Press [

Call Fwd

]

or Dial Call Forward access code

.

Dial extension or number where calls will be sent.

Hang up.

To cancel Call Forwarding

1

While off-hook, press softkey below CFrwd

or Press [

Call Fwd

] again

or Dial Call Forward cancel code

.

2

Hang up.

4

CALL PARK

To park a call at your extension (for retrieval
at any extension)

1

2

3

4

5

6

7

Press [

Transfer

].

Dial Call Park trunk group access
code

.

Dial Call Park zone number.

Dial an idle Answer-Back channel number.

Press [

Recall

].

Press [

Transfer

] again.

Hang up.

To retrieve a parked call from any extension

1

Dial Answer Back access code .

.

2

Dial channel number where call is parked.

CALL PICKUP

To answer a call placed to a member of your
pickup group

1

Press [

Call Pickup

]

or Dial Call Pickup access code

.

CONFERENCE

To add another party to a call (for a total of up
to three parties)

1

Press [

Conf

].

2

Dial number of new party and wait for answer or

press call appearance of held call.

3

Press [

Conf

] again.

To drop the last party added to a conference call

1

Press [

Drop

].

5

Advertising