HP p1130 21 inch CRT Monitor - Manual (Page 19)

HP 21” Color Monitor User’s Guide
Adjusting the shape of the picture (GEOMETRY)
18 English English
Adjusting the shape of the picture (GEOMETRY)
The GEOMETRY settings allow you to adjust the rotation and shape
of the picture.
The (rotation) setting is stored in memory for all input signals. All
other settings are stored in memory for the current input signal.
1 Press the button. The MENU appears on the screen.
2 Press the / buttons to highlight GEOMETRY and
press the button again. The GEOMETRY menu appears on
the screen.
3 Press the / buttons to select the desired adjustment
item and press the button. The adjustment bar appears on
the screen.
4 Press the / buttons to make the adjustment.
Select To
rotate the picture
expand or contract the picture sides
shift the picture sides to the left or right
adjust the picture width at the top of the screen
shift the picture to the left or right at the top of the screen
reset all the GEOMETRY settings
P4819A_us.fm Page 18 Friday, September 21, 2001 4:00 AM