HP p1130 21 inch CRT Monitor - Manual (Page 25)

HP 21” Color Monitor User’s Guide
Adjusting the color of the picture (COLOR)
24 English English
3 Press the / buttons to select the R (red), G (green)
or B (blue) component of the input signal for both GAIN ( ) and
BIAS ( ).
4 Press the / buttons to make the adjustment.
sRGB mode
The sRGB color setting is an industry standard color space protocol
designed to correlate the displayed and printed colors of sRGB
compliant computer products. To adjust the colors to the sRGB
profile, simply select sRGB mode in the COLOR menu of the OPTION
menu.
However, in order to display the sRGB colors correctly (
γ
=2.2,
6500K), you must set your computer to the sRGB profile and adjust
the brightness (
) and contrast. For information on how to change
the brightness ( ) and contrast, see page 16.
NOTE Your computer and other connected products (such as a printer),
must be sRGB compliant.
Restoring the color from the EASY or sRGB menus
The colors of most display monitors tend to gradually lose brilliance
over several years of service. The COLOR RETURN feature found in
the PRESET, VARIABLE and sRGB modes allows you to restore the
color to the original factory quality levels. The explanation below
explains how to restore the monitor’s color from the PRESET menu.
1 Press the button. The MENU appears on the screen.
2 Press the / buttons to highlight COLOR and
press the button again. The COLOR menu appears on the
screen.
3 Press the / buttons to select COLOR
RETURN and press the button again.
4 Press the / buttons to select OK.
P4819A_us.fm Page 24 Friday, September 21, 2001 4:00 AM