HP Deskjet 990cxi Printer - Manual (Page 28)

28
Printing Basics: Infrared (Ir) Printing
Printing using a Windows CE Device
1 Locate the infrared lens on the Windows CE device.
This is typically found on one of the sides of the device.
2 Align the infrared lens of the Windows CE device with the
printer’s infrared lens. Position the Windows CE device up to 3
feet (1 meter) from the printer and within a 30-degree total angle
from the printer’s infrared lens.
Note: The path between the two infrared devices must be clear of
obstacles.
3 In the program from which to print, click File Print .
4 In the Printer box, choose either PCL Inkjet or JetSend (if
installed).
Note: The JetSend program can greatly enhance the appearance
of your printed information. For information on JetSend, go to the
following web site: http://www.jetsend.com.
5 In the Port box, choose IRDA .
6 Click OK .
The infrared light on the printer displays a solid beam during the
transfer process. When finished printing, the light will turn off.
Note: If the Windows CE device is moved out of range of the
printer’s infrared lens at any time during the printing process, the
infrared light will turn off and the printer may stop printing. If you
realign the devices within approximately 3–30 seconds
(depending on the device), the print job will resume.