HP Deskjet 990cxi Printer - Manual (Page 38)

38
Beyond the Basics: Printing Greeting Cards
Printing Greeting Cards
I should… Then… Guidelines…
1 Pull out the IN tray.
2 Slide out both paper guides and remove
all paper from the IN tray.
3 Insert up to 5 cards into the IN tray as far
as they will go.
4 Slide the paper guides snugly against
the edges of the cards.
5 Push in the IN tray.
6 Open the HP Printer Properties dialog
box (see page 7).
7 Choose HP Print Settings.
Setup Tab
• Paper Type: Choose either Automatic or the
appropriate greeting card type
• Print Quality: Choose Normal or Best
• Paper Size: Choose appropriate card size
Features Tab
• Orientation: Choose appropriate orientation
• Two-Sided Printing: Choose if appropriate.
Note: If using Automatic Two-Sided Printing, you
must use supported paper. See “Automatic Two-
Sided Printing Module Specifications” on page 83.
8 Print.
• Align the card edges before inserting the
cards.
• For ease of loading small cards, pull out the
IN tray and raise the OUT tray. After you
have inserted the media, lower the OUT tray.
• If you have pre-folded greeting cards,
unfold the cards, then load the cards into the
IN tray.
• If you get an “out of paper” message, make
sure the media is positioned properly in the
IN tray. Place the media on the right side and
towards the printer. The IN tray should be
pushed in so that the paper length guide can
hold the media in place.