HP Unified Extensible Firmware Interface - Manual (Page 62)

Figure 52 Server Availability — POST F1 Prompt screen
Setting Power Button Mode
Disabling this option disables the momentary power button functionality. This option does not effect
the four-second power button override or the remote power control functionality.
To set power button mode:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Server Availability and select Power Button Mode and press Enter.
2. Select one of the following options:
•
Enabled (default)—Enables the momentary power button functionality.
•
Disabled—Disables the momentary power button functionality.
3. Press F10 to save your selection.
62 Accessing the System Configuration Menu