HP Unified Extensible Firmware Interface - Manual (Page 89)

Figure 80 Advanced Options screen
Accessing Advanced System ROM Options
This menu lets you enter a chassis serial number and product ID, set ROM selection, NMI debug
button, virtual install disk, PCI bus padding, and power-on logo, and consistent device naming.
You can also enable SR-IOV support.
To access advanced system ROM options:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Advanced Options→Advanced System ROM Options and press Enter.
2. The following configuration options are available:
•
“Entering a Chassis Serial Number” (page 90)
•
“Entering a Product ID” (page 90)
•
“Setting ROM Selection” (page 90)
•
“Setting NMI Debug Button” (page 91)
•
“Setting Virtual Install Disk” (page 92)
•
“Setting PCI Bus Padding Options” (page 93)
•
“Setting Power-On Logo” (page 94)
•
“Enabling SR-IOV Support” (page 95)
•
“Setting Consistent Device Naming” (page 96)
•
“Setting PCI Express 64-Bit BAR Support” (page 97)
•
“Setting PCI Express 64-Bit BAR Support” (page 97)
•
“Setting ACPI RASF Table Support” (page 99)
•
“Setting ACPI Root Bridge PXM Preferences” (page 100)
•
“Configuring Extended Memory Test” (page 101)
•
“ACPI RTC Support” (page 102)
Accessing the BIOS/Platform Configuration (RBSU) menu 89