HP Designjet 4520 Printer series - Manual (Page 45)

6. Feed the paper from roll 1 onto the drawer 1 platen. Align the paper parallel with the blue lines on
the right side of the platen. The paper edge does not need to be aligned exactly with a specific blue
line, but between the two outer lines.
7. Feed the paper for a few centimeters more after the printer beeps, then turn the roller backwards
to tension the paper correctly.
8. Lower the paper load lever.
9. Push the drawer back into position.
ENWW Load a roll into the printer [4520] 35
Pa
p
er