HP Designjet 4520 Printer series - Manual (Page 158)

While the printer is in standby mode, it may briefly come to life and move the paper slightly from time to
time in order to maintain the paper in the best possible condition. This is done only with certain specific
paper types (film, glossy paper and heavyweight coated paper).
The printer unloads or trims the paper after a long period
of disuse [4520]
NOTE: This topic applies to the HP Designjet 4520 Printer series only.
The printer may automatically unload or trim a roll if it has not been used for several days, in order to
maintain the paper in the best possible condition. This is done only with certain specific paper types
(glossy and heavyweight coated paper).
The printer unloads the paper while switched off [4520]
NOTE: This topic applies to the HP Designjet 4520 Printer series only.
While the printer is switched off at the front panel, it may automatically unload a roll in order to maintain
the paper in the best possible condition. This is done only with certain specific paper types (glossy paper
and heavyweight coated paper).
The printer unloads the paper when switched on [4520]
NOTE: This topic applies to the HP Designjet 4520 Printer series only.
If the printer is switched off using the switch at the rear, or by disconnecting the power cable, or by a
power cut, whenever it is switched on again it may automatically unload a roll in order to maintain the
paper in the best possible condition. This is done only with certain specific paper types (glossy paper
and heavyweight coated paper).
CAUTION: If you want to turn off the printer, you are strongly recommended to use the Power button
on the front panel before using the switch at the rear or disconnecting the power cable.
148 Chapter 14 The problem is... (paper topics) ENWW
P
a
pe
r pro
b
le
ms