Change the language of the front panel, Access the embedded web server – HP Designjet 4520 Printer series User Manual

Page 27

Advertising
background image

6.

Insert the power cord into the power socket and switch on the printer using the power switch.

7.

Check that the Power light on the front panel comes on. If it does not, use the

Power

key to switch

the printer on.

Change the language of the front panel

There are two possible ways to change the language of the front-panel menus and messages.

If you can understand the current front panel language, go to the front panel and select the

icon,

then Printer configuration > Front panel options > Select language.

If you cannot understand the current front panel language, start with the printer powered off. At the
front panel, press the

Select

key and hold it down. While holding the

Select

key down, press the

Power

key and hold it down. Continue to hold down both keys until the green light on the left side

of the front panel starts flashing, then release both keys. You can expect a delay of about one
second. If the green light starts flashing without any delay, you may need to start again.

Whichever method you used, the language selection menu should now appear on the front panel.

Highlight your preferred language, then press the

Select

key.

Access the Embedded Web Server

The Embedded Web Server enables you to manage your printer and your printing jobs remotely using
an ordinary Web browser running on any computer.

NOTE:

In order to use the Embedded Web Server, you must have a TCP/IP connection to your printer.

If you have a Novell or USB connection to your printer, you will not be able to use the Embedded Web
Server.

The following browsers are known to be compatible with the Embedded Web Server:

Internet Explorer 5.5 or later, for Windows

Firefox 1.5 or later

Safari.

There are several ways to access the Embedded Web Server:

On any computer, open your Web browser and give the address of your printer. You can find out
the address of your printer (starting with http:) from the front panel, by highlighting the

icon.

Select Status of my printer or Manage my printer's queue from the Services tab of your Windows
printer driver, or from the Services panel of your Mac OS printer driver.

If you have followed these instructions but failed to get through to the Embedded Web Server, see

I

cannot access the Embedded Web Server from my browser on page 182

.

ENWW

Change the language of the front panel

17

P

rint

er oper

a

tion

Advertising
This manual is related to the following products: