Select the orientation of the image – HP Designjet 4520 Printer series User Manual
Page 71
You can request no added margins in the following ways:
●
Using the Windows HP-GL/2 and HP RTL printer driver: select the Paper/Quality tab and press
the Margins/Layout button, then select Clip Contents By Margins from the layout options.
●
Using the Windows PostScript printer driver: select the Paper/Quality tab, then Size is, and select
an oversize page. Press the Margins/Layout button, then select Clip Contents By Margins from
the layout options.
●
Using the Embedded Web Server: on the Submit Job page, select Clip Contents By Margins from
the Margin layout list.
●
Using the front panel: select Default printing options > Paper options > Select layout > Clip
contents by margins.
This option is not available from the Windows PostScript driver or the Mac OS drivers.
When using this option, you can select the width of the margins as usual (see
). The printer continues to use margins: it just takes them out of the image instead of adding
them to the image.
Select the orientation of the image
The orientation of the image may be portrait or landscape. When you see it on screen:
●
The height of a portrait image is greater than its width (a tall image).
●
The width of a landscape image is greater than its height (a wide image).
You should select the orientation that your image has when you see it on screen. If you have a landscape
image and you select portrait, or if you have a portrait image and you select landscape, the image may
be clipped when printed.
You can select the orientation using a printer driver or the Embedded Web Server.
●
Using the HP-GL/2 and HP RTL printer driver for Windows: go to the Orientation section of the
Finishing tab.
●
Using the PostScript printer driver for Windows: go to the Orientation section of the Paper/Quality
tab.
●
Using the PostScript printer driver for Mac OS: select Page Setup from the File menu, then go to
the Orientation section of the Page Attributes panel.
NOTE:
If there is no Page Setup in the File menu, select Print and then Orientation.
●
Using the Embedded Web Server: go to the Orientation section of the Submit Job page.
ENWW
Select the orientation of the image
61
Image
adjus
tme
nt