HP Designjet 4520 Printer series - Manual (Page 74)

Change the palette settings
You cannot change the Factory palette, but you can define Palettes A and B to be whatever you choose.
These palettes will be applied only to HP-GL/2 and HP RTL jobs with no software palette embedded.
NOTE: All HP-GL/2 and HP RTL jobs generated by the HP-GL/2 and HP RTL driver that comes with
the printer will include an embedded software palette, and thus any palette settings in the front panel
will be ignored.
To redefine Palette A:
1. Go to the front panel, select the icon, then Default printing options > HP-GL/2 options >
Define palette > Palette A.
2. Scroll to the pen number you want to change and press Select .
3. You can see the current width assigned to this pen by selecting Width; for example Width=0.35
mm. If you want to change it:
4. Press Select .
5. Scroll to the width you want.
6. Press Select again.
7. Press Back to get to the previous menu: Color/Width. Otherwise, scroll to Color.
8. When you select Color, the current color assigned to the pen is displayed, for example
Color=110. If you want to change it:
9. Press Select .
10. Scroll to the color you want.
11. Press Select again.
12. Press Back to get to the previous menu.
13. When both width and color are correct, press Back .
14. Scroll to the next pen number you want to change, press Select and then repeat the above process.
15. When all pen definitions are correct, press Back to exit the menus.
NOTE: The palette you have just defined will take effect only when you select it to be the current
palette.
If you do not get the results you expect, see Pen settings seem to have no effect on page 165 .
64 Chapter 7 How do I... (image adjustment topics) ENWW
Im
ag
e a
d
ju
st
me
n
t