HP Hitachi Dynamic Link Manager Software - Manual (Page 238)

Displayed Item
Description
No
summary
displayed
Summary
displayed
One of the following values is displayed for each path:
•
-
Indicates that intermittent error monitoring is disabled or
the monitoring time for an intermittent error is out of
range (the path status is Online(E), Offline(C) or
Offline(E)).
• A value of at least 0
Indicates the number of errors that occurred during
intermittent error monitoring (the path status is
Online(E), Offline(E), or Online).
• *
Indicates that an intermittent error occurred (automatic
failbacks do not check the path) (the path status is Online,
Online(E), or Offline(E)).
HBAPortWW
N
#1
- A 16-digit hexadecimal number indicating the WWN
information for an HBA connected to the storage system. This
item is displayed only when you specify the -hbaportwwn
parameter or when you specify hbaportwwn for the -item
parameter.
Note that a hyphen (-) is displayed in the following cases:
•
When using the EMC DMX, EMC CX, or HP EVA series
• When using iSCSI interfaces
Legend:
- : Not displayed
#1
The path information is displayed only when a value is specified for the -
path -item parameter.
#2
In a cluster configuration, an offline operation requested during reserve
processing is put into the waiting-to-execute state, and does not execute
until the reserve processing finishes.
#3
The drive letter assigned to a dynamic disk volume is not displayed.
Table 6-14 Elements of a Path Name
Element Windows representation
Host port number (hexadecimal)
(example: 0004, 0005)
SCSI port number
Bus number (example: 0001) SCSI bus number
6-50
Command Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))