HP Identity Driven Manager Software Licenses User Manual
Page 145
4-9
Using the Secure Access Wizard
Using Secure Access Wizard
You can refer to the "Using ProCurve Mobility Manager" chapter in the
ProCurve Manager v2.2 Network Administrator’s Guide
for a more
complete description of the wireless (WLAN) security settings.
b.
Click the Advanced Settings for Wired 802.1X to configure the
advanced settings.
Figure 4-7. Secure Access Wizard, Advanced Settings for Wired 802.1X
c.
Click the check box to select the setting to configure, then enter the
parameter to be applied.
When a parameter is configured, the
Reset to default values
option is
enabled. Click the link to restore the advanced settings for wired
802.1X defaults.
Advanced 802.1X settings for wired devices include:
TX period
- The period of time the switch waits until retransmission of
EAPOL PDU (default 30 sec.). Valid values are 1-65353.