HP Identity Driven Manager Software Licenses User Manual
Page 70
3-8
Using Identity Driven Manager
Configuring Locations
5.
Enter the Device to be added using the
Device Selection pull-downs, or
select the
Manually enter device address option.
Using the
Device Selection
option:
a.
Select a device group using the pull-down menu. This will enable the
Select Device
pull-down menu in the next field.
b.
Select a device from the pull-down list of available devices. The list
is populated with the IP address or DNS name for all (PCM managed)
devices in the selected group.
Using the
Manually enter device address
option:
a.
Click the check box to enable the data entry field below it.
b.
Type in the IP address or DNS name of the device to be added.
N o t e :
If PMM is licensed, this dialog will not show wireless device. You must add
wireless devices from the "Wireless Devices" tab on the "New Location Dialog"
If PMM is not licensed, wireless devices will appear in this dialog. However,
you will not be able to select any ports, the only option will be "Any port"