HP 9000 Virtual Library System - Manual (Page 201)

Status Description Item
• If the Full Duplex (FDx) indicator LED is lit, the port LEDs light for those ports that
are operating in full duplex mode.
•
If the Speed (Spd) indicator LED is lit, the port LEDs behave as follows to indicate
the connection speed for the port:
◦
OFF = 10 Mb/s
◦
Flashing = 100 Mb/s (the flashing behavior is a repeated on/off cycle once
every 0.5 sec.)
◦
ON = 1000 Mb/s
For the dual-personality ports (ports 21 through 24), indicates which connector is
enabled: T/M LEDs 10
•
T = Indicates the 10/100/1000Base-T RJ-45 port is enabled.
• M = Indicates the mini-GBIC port is enabled.
1
The blinking behavior is an on/off cycle once every 1.6 seconds, approximately.
Ethernet Switch E6600 Components, LEDs, and Buttons
Front Panel Components
Description Item
Console port 1
Auxiliary port 2
10/100/1000Base-T RJ-45 ports 1 through 24
(numbered from top to bottom, left to right) 3
10/100/1000 mini-GBIC dual-personality ports 21 through 24 4
Front Panel LEDs and Buttons
Status Description Item
Green = The switch is operating correctly. Power LED 1
Ethernet Switch E6600 Components, LEDs, and Buttons 201