Starting auto lun xp, Iscsi support, Auto lun pane – HP XP Auto LUN Software User Manual
Page 18
18
Auto LUN XP for the XP1024/XP128
data to the migration destination; therefore, the copy operation takes more time. Auto LUN XP attempts to
copy data that have not been migrated and data that have already been copied to the migration
destination.
To power off the disk array, obtain the monitoring results first. If you do not, the Physical tab will not
display some monitoring results. For example, if 4:00 a.m. and p.m. is specified in the Gathering Time
option in the Auto LUN XP Monitoring Options pane and you turn off the power to the disk array at
5:00 p.m., the Physical tab will not display the monitoring results from 4:00 p.m. to 5:00 p.m.
iSCSI support
NOTE:
iSCSI is currently supported only for XP1024/XP128 disk arrays.
Starting Auto LUN XP
1.
Log in to Command View XP or XP Remote Web Console. For detailed information, see the
HP StorageWorks Command View XP User Guide for XP Disk Arrays or the HP StorageWorks XP
Remote Web Console User Guide for XP1024/XP128.
2.
Ensure that you are in Modify mode. For details, see the HP StorageWorks Command View XP User
Guide for XP Disk Arrays or the HP StorageWorks XP Remote Web Console User Guide for
XP1024/XP128.
3.
Click Auto LUN in the left pane. The Auto LUN pane appears.
Figure 4
Auto LUN pane
4.
Click Monitoring Options. The Monitoring Options pane appears.
Auto LUN pane
The Auto LUN pane is the performance management pane. It displays usage rates for parity groups,
logical volumes, channel processors, disk processors, and so forth. The pane has several sections.
NOTE:
If a hyphen appears in monitoring data columns on the Auto LUN pane, statistics cannot be
collected for that item.