HP XP P9000 Command View Advanced Edition Software - Manual (Page 67)

Descriptions Subfields
Fields and
Dropdowns
Creating Volume Settings, and related fields, is only displayed when
entered volume criteria require a new volume to be created. See Volume
Capacity field above for an example.
This field displays formatting methods available for the volume to be
created, as available for basic volumes on the specified storage system.
For example, you might see options for a quick or basic format.
Format Type
Creating
Volume Set-
tings
This field displays stripe size options for the volume to be created, as
supported by the specified storage system. For example, 64KB.
Stripe Size
This field only displays for created users (non built-in accounts) allocating
volumes, who can potentially source the volume or volumes from multiple
resource groups the user has access rights to, as configured for their ac-
count.
-
Resource
Group
Clicking LUN Path Options displays fields and buttons to set or change
the LUN paths, which are storage port to host port mappings that connect
volumes and hosts.
(See next 2
fields below)
>> LUN Path
Options (drop-
down)
Specify the number of LUN paths to allocate per host. Note that changing
the path count may cause the system to suggest a new path for you
automatically.
Click Edit LUN Paths to assign or change LUN paths. The paths are
displayed graphically or in table format. In both views, you can use links
to view WWN nickname information to confirm the target host bus adapter
(HBA).
• In graph view, click on a storage port row to add it to the LUN Path
Editor panel. Connect the line to the target HBA. Another line is dis-
played, which you can connect to another HBA or discard with a click.
• In table view, select a storage port, then a host port row, then click
Add to move the mapping to Selected host Ports panel.
You can delete default or incorrect mappings by clicking on the connector
line in graph view, or using the remove button in table view.
-
No. of LUN
paths per
Volume
These related screens only display under LUN Path Options when Allocate
without LUN security is selected from the host drop-down. See Hosts field
above.
Unsecured ports are listed in LUN Security Disabled Storage Ports. You
select the port or ports to make the volume available on, and click Add to
move them to Selected Storage Ports. You can review your plan and submit
the allocation task. All hosts that can access the port or ports the volume
is on can access the volume.
-
LUN Security
Disabled Stor-
age Ports, Se-
lected Storage
Ports
Volume allocations using Fibre Channel will prompt for items such as host
group name, host mode, host mode options, and LU number.
The following fields can be displayed or hidden by clicking Host Group
and LUN Settings.
(See next 2
fields below)
>> Host
Group and
LUN Settings
(dropdown)
When volumes are allocated to multiple hosts simultaneously, this option
specifies configuring all hosts in a single host group. Shared by All
Hosts
Host Groups
When volumes are allocated to multiple hosts simultaneously, this option
specifies configuring a separate host group for each host. Separate for
Each Host
User Guide 67