HP XP P9000 Command View Advanced Edition Software - Manual (Page 41)

The host list is updated.
NOTE:
If a host name is changed, both of the host names (before and the after change) might be displayed
on the Resource tab. In this case, delete the host before making the change. When copy pairs are
managed by the host where Device Manager agent is installed, in addition to deleting the host, the
storage system also needs to be updated.
Reviewing data collection tasks
This module describes reviewing data collection tasks to verify the success or failure of managed
target operations, such as registration.
About data collection tasks
From the Administration tab, Managed Resources you can add, refresh, edit, and remove storage
systems and hosts. This adds or changes Command View AE Suite information about the storage or
host resource.
You can also add or refresh storage systems and hosts from the Resources tab, but not edit or remove
them.
From the Administration or Resources tab you get the same dialog, and are informed that you are
performing a data collection task for the resource. As they are performed, these operations are listed
under the Administration tab, Managed Resources, Data Collection Tasks tab, and can be sorted,
filtered, and deleted.
NOTE:
The Tasks & Alerts tab does not list data collection tasks. Also, the global monitoring bar task status
links are for Tasks & Alerts tab items only, not data collection tasks.
For each data collection task:
• Type indicates the performed operation (for example, Add Storage System)
• Status indicates completion or failure of the operation
TIP:
Click the status link to review the diagnostic message for a failed task.
Delete finished tasks if they are no longer necessary.
User Guide 41