Timers tab, General menu – HP Modular Cooling System User Manual
Page 28
Web interface 28
2.
In the Condensation Pump field, select Enable.
Timers tab
This screen enables the Admin to change timer settings for the management module. Timers are used to
disable particular trap receivers on different days at different times of the week.
NOTE:
The following screen is the same for either MCS-100 or MCS-200 units.
To change the timer settings:
1.
Select to enable or disable the timer control from the Timer Control radio buttons.
2.
Select a day of the week from the Day of Week dropdown box.
3.
Enter a time interval in the Time Interval field.
4.
Select a timer function from the Timer Function dropdown box.
5.
Do one of the following:
o
Click Save Settings to save the information.
o
Click Cancel to undo the changes.
General menu
Click General in the left navigation frame to display the General screen. This screen enables the Admin to
configure general management module parameters.
NOTE:
The following screen is the same for either MCS-100 or MCS-200 units.