Trap receivers tab – HP Modular Cooling System User Manual
Page 32
Web interface 32
To enter the contact information:
1.
Enter the name of the management module in the System Name field.
2.
Enter the name of the contact person in the System Contact field.
3.
Enter the name of the location in the System Location field.
4.
Enter the Read community string.
5.
Enter the Write community string.
6.
Enter the Trap community string.
7.
Do one of the following:
o
Click Save Settings to save the information.
o
Click Cancel to undo the changes.
Trap Receivers tab
This screen enables the Admin to enter information for servers that receive SNMP traps from the management
module.
To receive traps in HP SIM, see "Systems Insight Manager integration (on page
)."
NOTE:
The following screen is the same for either MCS-100 or MCS-200 units.
To configure which servers receive traps:
1.
Select to enable or disable SNMP authentication traps from the Authentication Traps radio buttons.
2.
Select to enable up to four SNMP traps from the Trap Receivers 1 through 4 radio buttons.