HP LaserJet M4345 Multifunction Printer series - Manual (Page 86)

Kerberos Authentication
NOTE The Kerberos Authentication screen will appear in future releases of the HP EWS for
the HP LaserJet M3035mfp, HP LaserJet M4345mfp, and HP LaserJet M5035mfp products.
Kerberos is a network authentication protocol. It is designed to provide secure authentication for client/
server applications by using secret keys delivered with session tickets.
Before following the steps outlined here, you must have completed the following steps:
1. Install the Microsoft LDP tool.
2. Discover the LDAP server.
3. Set up LDP.
After you have performed these steps, perform the steps in the following section, Initializing Kerberos
authentication .
Initializing Kerberos authentication
Follow these steps to initialize Kerberos Authentication for your product.
NOTE Embedded Kerberos Authentication uses session tickets in the authentication process.
The session tickets are time stamped by both the Kerberos Domain Controller (KDC) and the
product. It is essential that the stamped times are within five minutes of each other. This can be
accomplished by setting identical time on both the KDC and product.
1. Open the HP EWS in a web browser.
2. Select the Settings tab, and then Kerberos Authentication.
3. Under the Accessing the Kerberos Authentication Server section, perform the following steps:
a. Type the domain name in the Kerberos Default Realm (Domain) field. The domain name is
case-sensitive and must use only uppercase letters, for example: TECHNICAL.MARKETING.
b. Type the product IP address in the Enter the Kerberos Server Hostname field, for
example: 15.62.64.203 (IP address)
NOTE The Kerberos Server Port field fills automatically as 88.
4. Under the Accessing the LDAP Server section, perform the following steps:
a. Select Kerberos from the LDAP Server Bind Method drop-down menu.
b. Click to select the Credential method you want to use.
If choosing Use Public Credentials, type in a username and password.
NOTE Remember how you set up the username on the LDP screen. The username
is defined within the device user DN value in the LDP trace and is not in standard
Windows domain account format. The format is often your entire e-mail address,
including the @xx.xx.
76 Chapter 4 Setting the digital sending options ENWW