HP ProLiant BL480c Server-Blade - Manual (Page 67)

Troubleshooting 67
POST problems flowchart
Symptoms:
• Server does not complete POST
NOTE: The server has completed POST when the system attempts to access the boot device.
• Server completes POST with errors
Possible problems:
• Improperly seated or faulty internal component
• Faulty KVM device
• Faulty video device
Item Refer to
1 Server blade power-on problems flowchart (on page 65 )
2 "POST error messages and beep codes (on page 72 )"
3 "Video problems" in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation CD or on the HP website
( http://www.hp.com/support )
4 "Symptom information (on page 61 )"
5 "General memory problems are occurring" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website ( http://www.hp.com/support )
6 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
( http://www.hp.com/support )
• Maintenance and service guides for c-Class server blades, located
on the Documentation CD or the HP website
( http://www.hp.com/go/bladesystem/documentation )
7 • "Server information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
HP website ( http://www.hp.com/support )
• "Operating system information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
HP website ( http://www.hp.com/support )