HP Storage EVA Capacity Upgrades - Manual (Page 19)

30-10022-01 loop switch user guide 19
Managing and Monitoring the Switch
The 30-10022-01 loop switch provides several options for managing, configuring, and monitoring the
switch to meet the needs of the network environment. This section describes the features and
functionality of each Web Manager page available in the navigation menu.
Viewing Switch Information
The Web Manager’s home page is the Switch Information page. This page is displayed first when the
Web Manager is opened and shows general switch information, including switch status, switch
identification information, and port health and utilization. The last time the switch was polled is
displayed at the top of the page.
This page continually refreshes to guarantee that the most current switch status is displayed. To
return to this page at any time, click the Switch Information menu item.
Switch Status
Current status is provided for the following items.
Switch Identification
This section displays the following information.
Figure 8 Switch Information page
Item Status Indicators
Fault LED status • nominal–the switch is operating normally.
• faulted (red)–the Fault LED has been triggered.
Temperature sensor • nominal–the switch temperature is within the normal operating range.
• overtemp (red)–the enclosure temperature has exceeded the recommended oper-
ating range.
Fan 1 • nominal–the fan unit is working properly.
• faulted (red)–the fan unit has stopped operating. Verify that the power supply/fan
module is properly seated in the switch.
Item Status Indicators
MAC ID A unique device address (MAC address) assigned to each switch at the factory.
Firmware version The current firmware loaded on the switch.