HP XP20000XP24000 Disk Array - Manual (Page 55)

alphanumeric characters (ASCII codes), except for some symbols, such as ", \, ;, :, ,, *, ?, <, >,
|, /, ^, &, and %. You can also use a space, except for before and after the device name. If
you enter a space before or after the device name, an error occurs when you click Apply. The
device name is required to use SNMP Agent. For detailed information on SNMP, see the HP
StorageWorks XP24000/XP20000 SNMP Agent Reference Guide.
Note: Make sure to document the device name, because the settings will be cleared when
the SVP is replaced.
• Contact: Contact information such as personnel and telephone number where you can inquire
about the connected storage system. The Remote Web Console user can change the contact
information with the modify mode. You must enter the contact information using up to 180
alphanumeric characters (ASCII codes), except for some symbols, such as ", \, ;, :, ,, *, ?, <, >,
|, /, ^, &, and %. You can also use a space, except for before and after the contact information.
If you enter a space before or after the contact information, an error occurs when you click Apply.
The contact name is required to use SNMP Agent. For detailed information on SNMP, see the HP
StorageWorks XP24000/XP20000 SNMP Agent Reference Guide.
Note: Make sure to document the contact name, because the settings will be cleared when
the SVP is replaced.
• Location: Location of the connected storage system. The Remote Web Console user can change
the device location with the modify mode. You must enter a device location using up to 180
alphanumeric characters (ASCII codes), except for some symbols, such as ", \, ;, :, ,, *, ?, <, >, |,
/, ^, &, and %. You can also use a space, except for before and after the location. If you enter a
space before or after the location, an error occurs when you click Apply. The device location
is required to use SNMP Agent. For detailed information on SNMP, see the HP StorageWorks
XP24000/XP20000 SNMP Agent Reference Guide.
Note: Make sure to document the device location, because the settings will be cleared when
the SVP is replaced.
• Firmware Version:
• Main: Version of the microcode installed in the connected storage system.
• SVP: Version of the Remote Web Console Java application program installed in the SVP of
the connected subsystem.
• Server: Version of the RMI server installed in the SVP of the connected storage system.
• Device View: Product name and visual image (picture) of the connected storage system.
LDEV Information
LDEV Information is on the lower part of the Information window (see Figure 24 on page 56). LDEV
Information consists of Device Type, Capacity and Number of LDEVs.
Note: If you have logged in as a storage partition administrator, information about the allocated SLPR is
displayed instead of for the whole storage system.
XP24000/XP20000 Remote Web Console User’s Guide 55