HP Deskjet 950c Printer - Manual (Page 37)

31
Using and Caring for Your Print Cartridges 3
Manually Cleaning the Print Cartridges and Print Cartridge Cradle
In order to properly clean the print cartridges and cradle, you will need distilled or
bottled water and cotton swabs or a similar lint-free absorbent material that will
not stick to the cartridges.
Manually Cleaning the Print Cartridges
1 Press the Power Button to turn the printer on, then lift the top cover.
2 After the print cartridges move into an accessible position, unplug the power
cord from the back of the printer.
Keep new and used print cartridges out of the reach of children.
3 Remove the print cartridges and set them on a piece of paper with the ink
nozzle plate facing up.
Do NOT touch the print cartridge ink nozzles or copper contacts. Touching
these parts will result in clogs, ink failure, and bad electrical connection.
Also, do NOT remove the copper strips; these are required electrical
contacts.
4 Dip a clean cotton swab into distilled water and squeeze any excess water from
the swab.
5 Clean the face and edges of the
print cartridge as shown. Do NOT
wipe the nozzle plate.
6 Inspect the cartridge for fibers on
the face and edges. If fibers are
still present, repeat the cleaning
process.
7 Repeat the cleaning process for the other print cartridge.
Once you’ve removed the print cartridges, make sure that they are not
outside of the print cartridge cradle longer than 30 minutes.
Warning
Caution
Do NOT clean
nozzle plate
Clean
Caution