HP XP P9500 Storage - Manual (Page 103)

Selected Pairs table
Description Item
Primary Volume •
LDEV ID: The P-VOL’s LDEV identifier
• LDEV Name: The P-VOL’s LDEV name
•
Emulation Type: The P-VOL’s emulation type
• Capacity: The P-VOL’s volume capacity
•
CLPR: The P-VOL’s CLPR number
Shows the following types of pairs: Copy Type
• BC-L1: BC L1
•
BC-L2: BC L2
•
FS: FS
• SS: SS
•
BC Z: BC Z
(FS only.) Snapshot Group
The snapshot group name.
If you have not set a snapshot group for FS pairs, this item is blank.
For BC/SS, BC Z and SS pairs, a hyphen (-) is shown.
The pair status. Status
For more information, see “Pair status definitions” (page 53) .
The resync type. Resync Type
Values:
• Normal Copy (Primary > Secondary)
•
Reverse Copy (Secondary > Primary)
•
Quick Resync (Primary > Secondary)
• Quick Restore (Secondary > Primary)
For more information, see “Types of resync operations” (page 48) .
(BC/SS and BC Z only.) Copy Pace
The speed at which the split operation is performed.
Values: Faster, Medium, Slower
Default: Medium
For FS and SS pairs, a hyphen (-) is shown.
The secondary information. Secondary Volume
Values:
•
LDEV ID: The S-VOL’s LDEV identifier
• LDEV Name: The S-VOL’s LDEV name
•
Emulation Type: The S-VOL’s emulation type
•
Capacity: The S-VOL’s volume capacity
• CLPR: The S-VOL’s CLPR number
(FS and SS only.) Snapshot Date
The date and time that a snapshot was acquired.
For BC/SS and BC Z pairs, a hyphen (-) is shown.
(FS and SS only.) Pool Name (ID)
The pool name and identification number.
Resync Pairs wizard 103