HP XP P9500 Storage - Manual (Page 44)

10. Click Next.
11. In the Select Secondary Volumes window, assign LDEVs as S-VOL to the P-VOL LDEV (or LDEVs)
selected in the Select Primary Volumes window.
Complete the following:
•
If you specified a P-VOL, select a secondary LDEV ID in the Available LDEVs table, and
click Set. Repeat this step to assign additional S-VOLs.
•
If you specified more than one P-VOL, select an LDEV ID in the Available LDEVs table,
then select a P-VOL LDEV ID in the Selected Pairs table, and click Set.
Repeat this step as many times as needed to make all your pairings.
By not selecting a P-VOL in the Selected Pairs table, the S-VOL you select and set is
assigned to P-VOLs in order from the first line of the table.
•
To sort the Available LDEVs and Selected Pairs tables according to the capacity, click
Capacity near the top of the window.
•
The remaining number you have to select refers to the P-VOLs that do not have an assigned
S-VOL, as seen in the Selected Pairs table.
•
Sort in the middle-left allows you to sort the Selected Pairs table.
44 Performing pair operations