HP Integrity NonStop H-Series User Manual
Page 131
DSNM Messages
Messages
098571 Tandem Computers Incorporated
A–3
- 60
Out of Memory
Cause.
There is insufficient memory to execute your command.
Effect.
Your command might have been partially executed. Use the information
commands to determine to what extent the command was executed.
Recovery.
Configure a larger segment size or break the command up into several
smaller commands. For information on configuring a larger segment size, see the
Distributed Systems Management Solutions (DSMS) System Management Guide.
- 64
File System Error
Cause.
The Guardian 90 file system generated an error during the execution of your
command.
Effect.
The effect depends on the specific file system error.
Recovery.
Refer to the Guardian User’s Guide for an explanation of the error and its
remedy.
- 67
Command Timeout
Cause.
The command timed out before it could be executed.
Effect.
Your command was not executed.
Recovery.
Issue the command again.
-69
Command Not Supported
Cause.
You issued a command that is not supported in the specified subsystem or on
the specified object types.
Effect.
Your command did not affect the objects for which the command is not
supported.
Recovery.
Refer to Section 2, "DSNM Commands," for information on which
commands are supported for the subsystem and objects you specified.