HP StorageWorks IP Storage Router - Manual (Page 33)

Installation
33 IP Storage Router SR2122-2 User Guide
Figure 12: Securing the rear of the rails
Installing SFP Modules
Before installing or removing an SFP (small form-factor pluggable) module, read
the installation information in this section. For connecting to SFP modules in the
Gigabit Ethernet ports and the Fibre Channel ports, read the instructions in the
“
Connecting to Gigabit Ethernet and Fibre Channel Ports ” section.
Note: Because of interoperability issues, HP does not support SFPs purchased from
third-party vendors. See Chapter B, “Cable and Port Pinouts” for SFP port
specifications.
Note: When fiber-optic cable plugs and SFP module receptacles are disconnected
from each other, place dust covers on them.
3
1
2