Introduction, Overview, Utp cat 6 and cat 6a cable use – HP Ethernet 10Gb 2-port 561T Adapter User Manual
Page 6
Introduction 6
Introduction
Overview
The HP Ethernet 10Gb 2-port 561T Adapter is a dual-port, 10GBASE-T stand-up NIC card for ML/DL/SL
ProLiant servers that uses the Intel X540 chipset. The adapter is available both built-to-order and
configure-to-order for Gen8 platforms. The HP Ethernet 10Gb 2-port 561T Adapter includes these advanced
server features:
•
SR-IOV support for Windows, Linux, and VMware
The server must have ROM support for SR-IOV and the operating system must support SR-IOV to use the
feature.
•
Sea of sensors for temperature monitoring of the device for optimized server power consumption
•
Active Health Systems support for Gen8 devices using network-provided information
•
Firmware upgrades without being taken offline (reboot to apply changes)
•
Copper-based 1/10Gb compatibility for existing RJ-45 infrastructures
For more information about the HP Ethernet 10Gb 2-port 561T Adapter, see the HP website
UTP Cat 6 and Cat 6A cable use
The HP Ethernet 10Gb 2-port 561T Adapter can use existing UTP Cat 6 (or better) cable. HP recommends Cat
6A cable for new installations. For troubleshooting and other information about cabling, see "UTP cable
)."