HP CM8000 Color Multifunction Printer series - Manual (Page 32)

Load Tray 5
This tray is preconfigured to hold up to 4,000 sheets (8 reams) of either Letter-size or A4-size paper.
You cannot change this size setting.
1. Open the Tray 5 top door, and load the paper. Load whole reams at a time. The tray lowers itself
as you load more paper.
● Load letterhead or preprinted paper with the printed side face-down and the top edge to the
right.
NOTE: For duplex printing, load letterhead or preprinted paper with the printed side facing-
up and the top edge feeding first.
● Load prepunched paper with the side that has holes toward the front of the device.
2. Configure the tray for the type of paper by responding to the pop-up message that appears on the
touchscreen when you close the tray. Or, follow these steps:
a. From the Home screen, touch Supplies Status .
b. Touch the Trays tab.
c. If the paper type that is listed for the tray is not correct, touch the name of the tray, and then
touch
Modify .
d. Select the correct paper type, and then touch OK .
24 Chapter 1 Device basics ENWW