HP Lights-Out 100 Remote Management - Manual (Page 45)

Using LO 100 45
Installing a certificate or private key through a web browser
The Security Settings page enables you to install new keys and certificates for SSL and SSH connections.
To install a certificate through the browser:
1. Log in to LO 100 as an administrator.
2. Click Security Settings on the browser main menu navigation bar.
3. Enter the IP address of the TFTP server in the tftp server IP address field.
4. On the dropdown menu under File type, select Certificate.
5. Enter the file name of the certificate created (server_cacert.pem in this example) in the File Name
field. Include the path relative to the tftp server root in the file name.
6. Click Apply.
To install the private key through the browser:
1. Log in to LO 100 as an administrator.
2. Click Security Settings on the browser main menu navigation bar.
3. Enter the IP address of the TFTP server in the tftp server IP address field.
4. On the dropdown menu under File type, select Key.
5. Enter the file name of the key created (server_privkey.pem in this example) in the File Name field.
Include the path relative to the tftp server root in the file name.
6. Click Apply.
Installing a certificate or private key through the CLP
To install a certificate, log in to LO 100 as administrator through the CLP interface and issue the load
command to upload and install the certificate. For example:
load -source <URI> -oemhpfiletype cer
where:
o
<URI>
is the
//tftpserver IP/path/filename
to be downloaded.
o
tftpserver
is the URL or IP address of the TFTP server containing the certificate.